Certean Signals tracks 10 verified regulatory signals on Product Safety, most often involving Conama resolution 401/2008, Eu battery regulation, Ce Marking, UKCA Marking and affecting European Union, Brazil, United Kingdom, United States. Coverage runs from 5 April 2026 to 2 May 2026; each signal cites its official source and carries key dates and a confidence level.
Brazil's National Environmental Council (CONAMA) opened a public consultation in June 2023 to comprehensively revise Resolution 401/2008, which sets maximum lead, cadmium and mercury limits for batteries sold in Brazil and was published in the Diário Oficial da União on 5 November 2008. The revision targets alignment with the EU Battery Regulation and adds coverage of lithium-ion and solid-state batteries. It affects battery manufacturers, importers and distributors in Brazil. No closing or effective dates have been published.
The UK removed the expiry dates for CE marking recognition effective 1 October 2024, allowing CE marks to be used indefinitely for Great Britain market access alongside or instead of UKCA marking. This applies across electrical equipment, machinery, medical devices, construction products, toys and PPE. No transition period applies because the change expands rather than restricts options. Northern Ireland continues to require CE marking under the Windsor Framework. Official confirmation of the legislative instruments remains outstanding.
Product compliance obligations in the EU and US are broadening beyond type testing into data governance, cybersecurity, ESG and supply chain transparency. The EU General Product Safety Regulation extends consumer safety duties past traditional product categories, and the FDA Center for Devices and Radiological Health has published its proposed guidance list for fiscal year 2026. Manufacturers, importers and authorised representatives placing consumer products or medical devices on EU and US markets are affected. The article states no single compliance deadline.
Directive 2014/30/EU, the EU EMC Directive, has applied in full since 20 April 2016 to electrical and electronic apparatus and fixed installations placed on the EU market. Following the James Elliott ruling, harmonised standards cited in the Official Journal are treated as EU law for interpretation purposes, slowing new standards development from typical 2-3 year cycles to potentially 4-5 years for complex standards.
Five Member State authorities (Germany, Netherlands, Sweden, Denmark, Norway) submitted a universal PFAS restriction proposal under Article 68 of REACH Regulation (EC) No 1907/2006 in January 2023, potentially covering over 10,000 substances. ECHA published an updated proposal on 20 August 2025 expanding coverage to 23 sectors. The Risk Assessment Committee and Committee for Socio-Economic Analysis will deliver final opinions by the end of 2026, affecting textiles, electronics, food contact materials, automotive, aerospace and medical devices across the EU and EEA.
No regulator has issued rules governing AI compliance management systems. These platforms automate regulatory change tracking, documentation generation and certificate renewal monitoring for manufacturers operating under frameworks including GPSR (EU) 2023/988, REACH (EC) No 1907/2006, MDR (EU) 2017/745 and 21 CFR Part 820. Typical deployment runs 3-6 months, with supply chain integration taking 6-12 months. Manufacturers retain full liability for conformity regardless of the tools used.
EN 61000-6-3:2007/A1:2011, the generic EMC emission standard cited under the EMC Directive 2014/30/EU for residential, commercial and light-industrial equipment, entered its mandatory five-year technical review in 2024 under CENELEC Guide 34. Existing certifications stay valid and the current version remains the compliance route until any revision is cited in the Official Journal. A revised version would likely emerge between 2027 and 2029.
The Ecodesign for Sustainable Products Regulation (EU) 2024/1781 entered into force on 18 July 2024, creating the legal basis for the Digital Product Passport. A textile-specific delegated act is anticipated in January 2026, with enforcement of textile DPP requirements beginning July 2027. It affects every manufacturer, importer and authorised representative placing textile products on the EU market, requiring digital disclosure of material composition, production processes, environmental impact and end-of-life information via unique identifiers such as QR codes.
EAC conformity documentation under the Technical Regulations of the Eurasian Economic Union applies to spare parts and components placed on the market in Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan. Automotive spare parts fall under TR CU 018/2011 'On the Safety of Wheeled Vehicles', which covers 98 product categories. Certification bodies are annulling certificates issued without real testing, and revisions to several technical regulations are expected during 2026.
Regulation (EU) 2024/1781 (ESPR), in force since 19 July 2024, will require Digital Product Passports for electronics sold in the EU. The Commission's 2025-2030 ESPR Working Plan, adopted 16 April 2025, schedules horizontal repairability and recycled content measures for electronics with adoption in 2027 and enforcement in 2027-2028; mobile phones and tablets carry deadlines extending to 2030. The Commission's DPP Registry launches 19 July 2026, with registration a precondition for market placement.