Compliance intelligence for market surveillance — enforcement trends, authority priorities, inspection campaigns, recalls, and cross-border cooperation.
Certean Signals tracks 27 verified regulatory signals on Market Surveillance, most often involving EU Product Safety Regulation, CE Marking, RoHS, REACH and affecting European Union, United States, China, United Kingdom. Coverage runs from 6 May 2026 to 19 November 2026; each signal cites its official source and carries key dates and a confidence level.
China's State Administration for Market Regulation, through Announcement No. 14 of 2026 of the Certification and Accreditation Administration, establishes a national 'One List, One Database' system for qualification accreditation of inspection and testing institutions, effective 1 June 2026. The list fixes 11 statutory fields and the database holds more than 45,000 inspection and testing standards. CMA marks may only be applied to accredited capability items; out-of-scope accreditations will not be renewed on expiry.
Regulation (EU) 2025/40, the EU Packaging and Packaging Waste Regulation, has applied directly in all 27 Member States since 12 August 2026, replacing Directive 94/62/EC. It covers all packaging regardless of material and binds manufacturers, importers, distributors and producers through conformity assessment, EU declarations of conformity, Annex VII technical documentation, Annex V single-use format bans and PFAS restrictions in food-contact packaging. Member States must have penalty frameworks in place by 12 February 2027.
Supplier compliance documents are regulated evidence, not filing. US CPSC rules at 16 CFR 1107.26 require children's product certificates, testing plans and test results including component part testing to be retained for at least five years. In the EU, Article 7 of RoHS Directive 2011/65/EU requires manufacturers to hold technical documentation and run internal production control, while REACH Article 33 requires suppliers to communicate substances of very high concern above 0.1% weight by weight, with parallel SCIP database notification to ECHA.
European market surveillance authorities reported 961 dangerous products through the EU Safety Gate rapid alert system in Q1 2026. Cosmetics accounted for 26.1% of alerts (251 reports), toys 17.66% and electrical articles 15.3%, with 446 products (46.4%) originating from China. Recalls were ordered for 335 products (35%). Manufacturers and importers selling into the EU face coordinated bans across up to 13 countries, with the next deadline the Packaging Regulation on 12 August 2026.
EAC certification scope under the EAEU technical regulations covers only the model designations registered in the conformity document, not every variant in a commercial product family. Products in the unified list under Eurasian Economic Commission Decision No. 620 cannot be imported or sold without a valid certificate or declaration. Scheme choice matters: schemes 1c, 2c, 5c, 7c and 8c apply to serial production, schemes 3c, 4c and 9c to batch production. Certificate validity runs up to five years.
Germany adopted an ordinance modernising the national execution of EU ecodesign and energy consumption labelling rules, signed 8 October 2026 and published in the Federal Law Gazette as BGBl. 2026 I No. 292. It affects manufacturers, importers, authorised representatives and dealers placing energy-related products on the German market, operating alongside Regulation (EU) 2017/1369 on energy labelling and Regulation (EU) 2024/1781 (ESPR). Entry into force must be read from the published text.
Preferential duty claims depend on HS code classification: under each trade agreement's product-specific rules annexes, the HS code determines which origin rule applies — wholly obtained, substantial transformation, or specific processing operations. Under USMCA, certification of origin requires nine minimum elements including HS classification, may cover shipments within a twelve-month period, and supports preference claims up to four years from signature. EU preferential origin operates under Council Regulation (EEC) No. 2913/92 and Commission Regulation (EU) No. 1063/2010.
The Forced Labor Enforcement Task Force added 37 China-based companies to the UFLPA Entity List on 15 January 2025, raising the total to 144 organizations whose goods are barred from U.S. entry under the rebuttable presumption in Section 307 of the Tariff Act of 1930. The additions cover cotton (26), silicon/solar (six), and mining (five), affecting electronics, automotive/aerospace, apparel/textiles, and industrial materials importers. Designations took immediate effect.
The European Commission has published FAQ guidance on the battery digital product passport under Regulation (EU) 2023/1542, clarifying capacity thresholds, responsibility for creating and maintaining passports, incorporated batteries, dynamic data and exemptions. The passport obligation applies from 18 February 2027 to light means of transport, industrial and electric vehicle batteries placed on the EU market. The Commission's Digital Product Passport Registry and testing environment have been operational since 20 July 2026.
US Customs and Border Protection applies data analytics and AI-driven risk scoring to import entries, building importer risk profiles from filing accuracy, Post Summary Correction volumes, classification, origin and valuation consistency. This affects all US importers, with heightened exposure for e-commerce filers, related party transactions and goods under anti-dumping or countervailing duty orders. CBP audit authority rests on 19 USC 1509; no new deadline applies, since risk scoring runs continuously.
The U.S. Consumer Product Safety Commission published a direct final rule on 18 November 2026 (91 FR 74090) amending 16 CFR Part 1263 to incorporate by reference ANSI/UL 4200A-2026, replacing ANSI/UL 4200A-2023. The rule takes effect 13 February 2027 unless significant adverse comment is received within 30 days. It applies to all consumer products containing button cell or coin batteries sold in the United States, under Reese's Law.
The European Commission's Blue Guide on EU Product Rules (Official Journal C 247, 27.4.2022) confirms that only notified bodies may issue valid certificates for harmonised products, and only within their designated notification scope. Voluntary certificates from non-notified bodies have no legal value during market surveillance or customs checks. The clarification applies immediately across all EU member states and affects manufacturers in machinery, EMC, radio equipment and personal protective equipment sectors.
The UK Department for Energy Security and Net Zero issued a consultation on 16 October 2026, closing 24 December 2026, proposing to update Great Britain's ecodesign requirements for industrial fans by aligning with the EU's latest rules. The proposals raise minimum energy performance standards, revise scope definitions, and update product information and resource efficiency requirements. DESNZ estimates 5,990 GWh electricity savings and 0.07 MtCO2e traded carbon savings between 2026 and 2050, with a Net Present Value of +£128.7m. GB only.
The US EPA published a final rule on 28 October 2026 (91 FR 67771) updating the incorporation by reference of several voluntary consensus standards in the TSCA Title VI formaldehyde emission standards for composite wood products at 40 CFR Part 770, after the issuing organisations revised or superseded them. The update covers test methods and product standards and makes conforming scope and definitional changes, affecting manufacturers, importers and third-party certifiers of hardwood plywood, MDF and particleboard.
On 21 October 2026 the Council of the European Union agreed a negotiating position on a proposal to suspend certain extended producer responsibility requirements under the Packaging and Packaging Waste Regulation (PPWR). It targets the duty on EU-established packaging producers to appoint a representative in every member state where they place packaging. Reported, though unverified, parameters include a one-tonne per-member-state annual threshold and expiry in 2032. Nothing applies yet; trilogue negotiations with the European Parliament follow.
The FCC Space Bureau has updated the initial set of geostationary (GSO) satellite network reference links adopted in the Modernizing Spectrum Sharing for Satellite Broadband Report and Order. The action, DA 26-467, was released 12 May 2026 and published in the Federal Register on 5 November 2026. It affects US Part 25-licensed GSO and NGSO satellite broadband systems, and is intended to make reference links reflect typical and widespread GSO operations in the United States.
Commission Regulation (EU) 2026/2412, published in the Official Journal on 29 October 2026, amends Annex I to Regulation (EU) No 10/2011 and adds four substances to the EU plastic food contact materials positive list — FCM Nos 1086, 1087, 1088 and 1090 — from 18 November 2026 with no transition period. Each entry is conditional, with specific migration limits of 0.05 mg/kg for two substances and exclusions for infant formula and human milk. It affects PEEK, PLA, polyamide and filled plastic food contact articles.
The Bureau of Indian Standards has issued a circular recording the grant of the All India First Licence under IS 19608:2026, the Indian Standard for hot-rolled carbon and alloy steel plates, sheets and strips. The standard is in force, so domestic mills and foreign manufacturers can now apply for a BIS licence and use the ISI mark on flat-rolled carbon and alloy steel supplied to India. The circular cites no Quality Control Order and sets no mandatory compliance deadline.
Regulation (EC) No 765/2008 sets the accreditation and market surveillance framework for products placed on the EU market, replacing Regulation (EEC) No 339/93. Manufacturers inside and outside the EU carry identical obligations: identify applicable requirements, determine whether CE marking applies, complete the conformity assessment, draw up technical documentation and the EU declaration of conformity, and retain both for 10 years after the product is placed on the market.
PHMSA has proposed amending the US Hazardous Materials Regulations in 49 CFR Parts 171–180 to adopt international standards for proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations and vessel stowage requirements. The NPRM, identified as HM-215R, was published in the Federal Register on 10 February 2026 across 76 pages, with a further entry on 27 October 2026. The rule is at proposed stage, so no compliance date applies yet; chemical, battery, aerosol, medical supply and freight shippers are affected.
The Bureau of Indian Standards publishes a consolidated list of Quality Control Orders notified by Government of India ministries and due for implementation, each with its own enforcement date. Once a QCO applies, covered goods require a BIS licence and the mandatory Standard Mark before manufacture, import, sale or stocking in India. Listed categories include textiles, aluminium products, packaging materials and electrical equipment, affecting Indian manufacturers, importers and foreign suppliers.
Defra has opened a consultation on implementing due diligence regulations for timber and forest risk commodities in Great Britain, covering coffee, cocoa, cattle, soy, oil palm, rubber and timber and products derived from them. The regime would be legality-based, made under the Environment Act 2021, and is intended to apply to businesses with over £1 million turnover. The UK Timber Regulation would be strengthened alongside it. Northern Ireland is outside the consultation's scope.
Germany adopted the Third Ordinance Amending the EVPG Regulation on 14 October 2026, published in the Federal Law Gazette as BGBl. 2026 I Nr. 302. It amends the national implementing ordinance under the Energy-Related Products Act (EVPG) and affects ecodesign and energy-efficiency obligations for energy-related products placed on the German market, including product families such as electric motors and household electrical appliances. The instrument is in force at the adopted stage.
The UK national authority has published adopted statutory guidance on the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 2016 (SI 2016/1107), as amended by the Product Safety and Metrology (EU Exit) Regulations 2019. It covers conformity assessment, marking and placing-on-market duties for ATEX-scope electrical and mechanical equipment supplied in Great Britain, affecting manufacturers, importers and distributors of hazardous area equipment. The guidance states no transition deadline.
ENACOM Resolution 57/2026 grants indefinite validity to Argentine type approval certificates issued from 1 September 2026, ending the three-year renewal cycle for telecommunications equipment. Approvals move to third-party conformity assessment under RAMATEL via accredited Certification Bodies. Class A consumer products face post-market surveillance every two years; Class B professional equipment is exempt. Existing certificates receive automatic three-year extensions and remain valid until 26 February 2029.
The Office for Product Safety and Standards has published proposals to amend the UK designated standards lists for machinery and personal protective equipment, both dated 7 May 2026, with the resulting notices of publication scheduled for 5 June 2026. Further proposals cover low voltage equipment and construction products. Designated standards give presumption of conformity under Great Britain product safety regulations, so manufacturers UKCA marking these products must reconcile their technical files against the final notices.
EN IEC 63000:2018 is the only harmonised standard published under RoHS Directive 2011/65/EU. Its reference was published by Commission Implementing Decision (EU) 2020/659, and it fully replaced EN 50581:2012 on 18 November 2021. Compiling the technical file to Clause 4 gives presumption of conformity with Articles 7(b) and 7(e) only. Manufacturers of electrical and electronic equipment must retain the file and EU Declaration of Conformity for 10 years after placing on the market.