Compliance intelligence for EMC — standard updates, testing methodology changes, electromagnetic compatibility enforcement, and certification developments.
Certean Signals tracks 6 verified regulatory signals on EMC, most often involving CE Marking, EU Product Safety Regulation, EU Machinery Regulation, EU EMC Directive and affecting Russia, Belarus, Kazakhstan, Kyrgyzstan. Coverage runs from 6 May 2026 to 29 October 2026; each signal cites its official source and carries key dates and a confidence level.
The Regulatory Compliance Mark (RCM) is mandatory for electrical and electronic products supplied in Australia and New Zealand, covering electrical safety under the Electrical Equipment Safety System (EESS) and radio and EMC compliance under the Australian Communications and Media Authority (ACMA). Suppliers must complete five steps: responsible supplier registration, a Technical Compliance Folder, AS/NZS testing at accredited laboratories, a Supplier Declaration of Conformity, and RCM marking. The system is in full enforcement now; products without valid RCM certification cannot legally be imported or sold.
EAC certification scope under the EAEU technical regulations covers only the model designations registered in the conformity document, not every variant in a commercial product family. Products in the unified list under Eurasian Economic Commission Decision No. 620 cannot be imported or sold without a valid certificate or declaration. Scheme choice matters: schemes 1c, 2c, 5c, 7c and 8c apply to serial production, schemes 3c, 4c and 9c to batch production. Certificate validity runs up to five years.
The European Commission's Blue Guide on EU Product Rules (Official Journal C 247, 27.4.2022) confirms that only notified bodies may issue valid certificates for harmonised products, and only within their designated notification scope. Voluntary certificates from non-notified bodies have no legal value during market surveillance or customs checks. The clarification applies immediately across all EU member states and affects manufacturers in machinery, EMC, radio equipment and personal protective equipment sectors.
Indonesia's Ministry of Communication and Digital issued Decree No. 569/2025 on 19 December 2025, replacing Decree No. 352/2024 with revised technical standards for LTE and IMT-2020 (5G) subscriber stations, base stations and repeaters. It took effect in January 2026. Products already certified that support Band 41 (LTE) or n41 (5G) required re-certification by 19 January 2026. Domestic content thresholds remain 35% for subscriber devices and 40% for LTE base stations.
Vietnam has issued three technical regulations affecting mobile devices and IT equipment: QCVN 86:2025/BKHCN on electromagnetic compatibility, QCVN 134:2024/BTTTT on specific absorption rate, and Circular 29/2025/TT-BKHCN on IT and telecom safety, in force 31 December 2025. SAR certification becomes mandatory for 4G and 5G mobile phones on 1 July 2026, and for DECT phones, laptops and tablets on 1 July 2027. Existing SAR certificates must be updated or they cease to be valid.
The Office for Product Safety and Standards has published proposals to amend the UK designated standards lists for machinery and personal protective equipment, both dated 7 May 2026, with the resulting notices of publication scheduled for 5 June 2026. Further proposals cover low voltage equipment and construction products. Designated standards give presumption of conformity under Great Britain product safety regulations, so manufacturers UKCA marking these products must reconcile their technical files against the final notices.