Compliance intelligence for radio equipment — type approval changes, spectrum allocation updates, SAR limits, and wireless device certification worldwide.
Certean Signals tracks 15 verified regulatory signals on Radio Equipment, most often involving CE Marking, EU Radio Equipment Directive, EU Cyber Resilience Act, EU Product Safety Regulation and affecting European Union, Indonesia, Paraguay, United States. Coverage runs from 6 May 2026 to 6 November 2026; each signal cites its official source and carries key dates and a confidence level.
The Regulatory Compliance Mark (RCM) is mandatory for electrical and electronic products supplied in Australia and New Zealand, covering electrical safety under the Electrical Equipment Safety System (EESS) and radio and EMC compliance under the Australian Communications and Media Authority (ACMA). Suppliers must complete five steps: responsible supplier registration, a Technical Compliance Folder, AS/NZS testing at accredited laboratories, a Supplier Declaration of Conformity, and RCM marking. The system is in full enforcement now; products without valid RCM certification cannot legally be imported or sold.
CONATEL Resolution N° 1035/2025, effective on publication 23 April 2025, authorizes low-power wireless access systems in the 5.925–6.425 GHz band in Paraguay, enabling Wi-Fi 6E. Two device categories apply: Low Power Indoor and Very Low Power. The upper 6.425–7.125 GHz sub-band remains prohibited and must be disabled. Every device requires a CONATEL Certificate of Approval and compliance with technical standard NTC-RF-5925:2025 before sale or operation.
The European Commission's Blue Guide on EU Product Rules (Official Journal C 247, 27.4.2022) confirms that only notified bodies may issue valid certificates for harmonised products, and only within their designated notification scope. Voluntary certificates from non-notified bodies have no legal value during market surveillance or customs checks. The clarification applies immediately across all EU member states and affects manufacturers in machinery, EMC, radio equipment and personal protective equipment sectors.
Indonesia's Ministry of Communication and Digital issued Decree No. 569/2025 on 19 December 2025, replacing Decree No. 352/2024 with revised technical standards for LTE and IMT-2020 (5G) subscriber stations, base stations and repeaters. It took effect in January 2026. Products already certified that support Band 41 (LTE) or n41 (5G) required re-certification by 19 January 2026. Domestic content thresholds remain 35% for subscriber devices and 40% for LTE base stations.
ETSI's Industry Specification Group on Integrated Sensing and Communications published GR ISC 004 V1.1.1 in February 2026, announced 2 March 2026, identifying 19 key issues — 15 on security and privacy, 4 on sustainability — for ISAC in 6G systems. It is an informative Group Report, not a harmonised standard, and creates no conformity obligation. It feeds 3GPP SA3 work on 5G-Advanced ISAC security and a planned 3GPP study on ISAC security for 6G.
The FCC Space Bureau has updated the initial set of geostationary (GSO) satellite network reference links adopted in the Modernizing Spectrum Sharing for Satellite Broadband Report and Order. The action, DA 26-467, was released 12 May 2026 and published in the Federal Register on 5 November 2026. It affects US Part 25-licensed GSO and NGSO satellite broadband systems, and is intended to make reference links reflect typical and widespread GSO operations in the United States.
Japan's Ministry of Internal Affairs and Communications notified the WTO on 13 February 2026 (G/TBT/N/JPN/840) of a partial amendment to the Ordinance for Enforcement of the Radio Act expanding the frequency band for Tire Pressure Monitoring Systems and Remote Keyless Entry systems to 433.05-434.79 MHz and removing equipment enclosure requirements. Adoption and entry into force are both proposed for June 2026. Comments close 14 April 2026.
Indonesia's Ministry of Communication and Digital (KOMDIGI) issued Ministerial Decree No. 12 of 2025 on 15 January 2025, opening the 5925-6425 MHz band for Radio Local Area Network use, including Wi-Fi 6E, plus 57-64 GHz for Multiple Gigabit Wireless Systems. Low Power Indoor devices are limited to 200 mW EIRP (23 dBm) indoors; Very Low Power devices to 25 mW EIRP (14 dBm) indoors or outdoors. PERDIRJEN SDPPI NO 02 TAHUN 2019 remains valid for a maximum of six months.
Venezuela's CONATEL reduced the validity of newly issued type approval certificates from indefinite to one year under Administrative Provision No. 217, published in Official Gazette No. 43,208 on 8 September 2025. The limitation applies to telecommunications and radio equipment certificates issued through the SIGESTEL platform, operational since early 2026. Certificates issued before SIGESTEL retain indefinite validity. New applications average 10 weeks processing and now require annual renewal.
ANATEL Act No. 14158/2025, published 1 October 2025, became mandatory on 6 April 2026. It replaces and expands Act No. 14448/2017, adding Section 25 coverage for the 116–246 GHz range, revised out-of-band and spurious emission limits for 2.4 GHz and 5.8 GHz Wi-Fi, and a shift from EIRP to conducted power for specific device categories. It affects manufacturers of 5G, Wi-Fi 6/6E and high-frequency wireless equipment seeking Brazilian homologation.
Vietnam has issued three technical regulations affecting mobile devices and IT equipment: QCVN 86:2025/BKHCN on electromagnetic compatibility, QCVN 134:2024/BTTTT on specific absorption rate, and Circular 29/2025/TT-BKHCN on IT and telecom safety, in force 31 December 2025. SAR certification becomes mandatory for 4G and 5G mobile phones on 1 July 2026, and for DECT phones, laptops and tablets on 1 July 2027. Existing SAR certificates must be updated or they cease to be valid.
Commission Delegated Regulation (EU) 2022/30 made cybersecurity requirements under Article 3(3)(d), (e) and (f) of the Radio Equipment Directive 2014/53/EU mandatory from 1 August 2025 for radio equipment that connects to the internet or network infrastructure. It affects manufacturers of IoT devices, smart home products, wearables, radio modules and routers. Regulation (EU) 2024/2847, the Cyber Resilience Act, will replace these RED requirements for products with digital elements in 2027.
ENACOM Resolution 57/2026 grants indefinite validity to Argentine type approval certificates issued from 1 September 2026, ending the three-year renewal cycle for telecommunications equipment. Approvals move to third-party conformity assessment under RAMATEL via accredited Certification Bodies. Class A consumer products face post-market surveillance every two years; Class B professional equipment is exempt. Existing certificates receive automatic three-year extensions and remain valid until 26 February 2029.
Algeria's Executive Decree No. 26-97, signed 31 January 2026 and published in Official Gazette No. 13 on 15 February 2026, extends homologation certificate validity for electronic communication equipment from three to five years, mandates electronic filing, and caps processing at two months. Manufacturers and importers of telecommunications equipment are affected from 15 February 2026. Cellular equipment now requires a GSMA Type Allocation Code certificate.
The Office for Product Safety and Standards has published proposals to amend the UK designated standards lists for machinery and personal protective equipment, both dated 7 May 2026, with the resulting notices of publication scheduled for 5 June 2026. Further proposals cover low voltage equipment and construction products. Designated standards give presumption of conformity under Great Britain product safety regulations, so manufacturers UKCA marking these products must reconcile their technical files against the final notices.